YFD5512-D Brushed DC motor（Removable Carbon Brushes set）
1. Standard Operating Conditions |
|
|
Rated Voltage |
120.0 VAC Full wave rectification |
| Direction of Rotation | CCW With +ve voltage applied to +ve terminal , viewed from output |
2. Measuring Conditions |
|
| Motor Position | Motor to be held with shaft horizontally. |
| Power Supply | Regulated AC or DC power supply |
| Environment Temperature and Humidity | The test is made in principle at a temperature between 15℃ and 35℃ and at a relative humidity 75%. |
3. Electrical Characteristics (at initial stage after 30 seconds run-in) |
|
| No Load Current | 0.28A max |
| NO Load Power | 25.5 W max |
| No Load Speed | 20600±10% rpm |
| Rated Load Current | 1.37±12%A |
| Rated Load Power | 145.4±12% W |
| Rated Load Speed | 14600±10% rpm |
| Rated Load | Fan load with size 25x66.5 mm(approximately equivalent to /g-cm.) |
| Reference Characteristic Curve | See Motor Performance Curves And Characteristics. |
| Insulation Resistance | 10 M ohm(min) (DC:500V),between motor terminal and motor metal housing terminal and motor housing. |
| Hi-Pot Test | At 1250VAC/5mA(50Hz to 60Hz) for one minute,between motor |
| Vibration value | ≤ 3.5mm/s |
| Spark rating test | ≤ 1½ |
4. Mechanical Characteristics |
|
| External Apperance | See Motor Outline |
| Shaft End Play | 0.05~0.5 mm |
| Runout of Shaft Extension | 0.05 mm max.at 2/3 of output shaft side and measured by dial gauge |
| Motor Weight | 208g (Approx) |
5. Life test |
|
| Working condition | Intermittent(Bare motor only) |
| Test voltage | 125.0VAC Full wave rectification |
| Load | 145.0 W max |
| Test cycle | 60 Seconds on, 60 Seconds off is cycle. |
| Test cycle Duration | TBD hour min(on time).After life tested free load & fan load current are reference only |
6. Environmental Test |
|
| High temperature test | Storing the motor for 100 hours at +90℃ And then 24 hours at room |
| Low temperature test | Storing the motor for 100 hours at -40℃ And then 24 hours at room |
7. Noise test |
68db(A) max/RMS,with following condition.No load at rated voltage,Set on sponge.Microphone at 30 cm aligned on the motor axis;background noise-level is 30dB(A)Max/RMS. |
8. Other Characteristics |
|
| Insulation Grade | Class B |
| ECP Requirement | Motor conform to 2011/65/EU RoHS Directive |
产品尺寸图
Related Downloads
YFD5512-2327-08Specification Sheet
Voltage (V）：3.0V-36.0V
No-load speed range (RPM)：3000RPM-36000RPM
Applications: hair dryers, electric hair dryer brush, electric air pumps, robotic vacuum cleaner, toys
Details
Voltage (V)：3.0V-36.0V
No-load speed range (RPM)：3000RPM-36000RPM
Applications: hair dryers, electric hair dryer brush, electric air pumps, robotic vacuum cleaner, toys
Details
Voltage (V)：3.0V-40.0V
No-load speed range (RPM)：3000RPM-24000RPM
Applications: hair dryers, electric hair dryer brush, electric air pumps, robotic vacuum cleaner, toys
Details
