Home  ⁄  Product  ⁄  Permanent Magnet Brushed DC Motor
YFD385 Brushed DC motor (Plastic back cover)
YFD385 Brushed DC motor (Plastic back cover)
YFD385 Brushed DC motor (Plastic back cover)

Permanent Magnet Brushed DC Motor

YFD385 Brushed DC motor (Plastic back cover)

Motor type:

DC motor

This is a motor that utilizes a rubber back cover to achieve excellent insulation, lightweight and corrosion resistance.

Applications: hair dryers, electric hair dryer brush, electric air pumps, robotic vacuum cleaner, toys
  • Technical Parameters
  • Dimensions
  • Downloads

1. Standard Operating Conditions

Rated Voltage

32.0V DC CONSTANT between motor terminals
Direction of Rotation CCW when viewed from output shaft side

2. Measuring Conditions

Motor Position Motor to be held with shaft horizontally
Power Supply Regulated power  supply which assures  unquestionable measurement
Environment Temperature and Humidity The test is made in principle at a temperature between 15℃ and 35℃ and at a relative humidity 75%

3. Electrical Characteristics (at initial stage after 30 seconds run-in)

No Load Current 0.19A max
No Load Speed 20320±8% rpm
No Load Starting Voltage 2.0Vmax
Rated Load Current 1.1±12%A
Rated Load Speed 16000±800 rpm
Rated Load Fan load with size 15x50 mm(approximately equivalent to159.3g-cm.)
Reference Characteristic Curve See motor performance curves and characteristics
Insulation Resistance 10 M ohm(min) (DC:500V) between motor terminal and motor metal housing
Dielectric Strength AC 500V/1mA(50Hz to 60Hz) for one minute between motor terminal and motor metal housing 
Vibration value ≤4.9mm/s

4. Mechanical Characteristics

External Apperance See Motor Outline
Shaft End Play 0.05~0.5 mm
Runout of Shaft Extension 0.05 mm max. at 2/3 of output shaft side and measured by dial gauge
Motor Weight 65.9  g (Approx)

5. Life

Test voltage 32.0V (Regulated DC power supply)
Load Fan load equivalent to 145.0g.cm
Test cycle 30 min on, 30 min  off is cycle
Duration 400  cycle

6. Noise test

70db(A) max/RMS,with following condition.No load at rated voltage,Set on sponge.Microphone at 30 cm aligned on the motor axis;background noise-level is 30dB(A)max/RMS

7. Other Characteristics

Insulation Grade Class B
ECP Requirement Motor conform to 2011/65/EU RoHS Directive

产品尺寸图

Product Inquiry

Product Information

Contact information